Tel: +91-079-25833037 Email:
You have no items in your shopping cart.

Characteristics and Tips of Deep Well Submersible Pumps

A submersible deep well jet pump may be a device that features a hermetically sealed motor close-coupled to the pump body. the complete assembly is submerged within the fluid to be pumped up. Submersible pumps push fluid to the surface as opposition jet pumps having to tug fluids.  Deep well submersible pumps ar a lot of economical than jet pumps.

First, i'd prefer to introduce the options of  submersible well pump: brass delivery casing and brass instrumentality pumps; NEMA dimension standards; equip with begin management box; five-hitter curve tolerance Applications: for water system from wells or reservoirs; for domestic use, for civil and industrial applications; for garden use and irrigation. operational conditions: most fluid temperature up to +35° C; most sand content: zero.3%.; most immersion: 100m; minimum well diameter: 4". Motor: rewindable motor; three-phase: 380-415V/50Hz; single-phase: 220-240V/50Hz; equip with special start-up management box. Special options available: frequency 60Hz; alternative mechanical seal; equip with Auto-control box.

Tips: the way to Pull a Deep Well Submersible Pump

1. Turn off power to the pump.
2. Mount a hand-crank winch in such the way on elevate the pump out partway.
3. Hook the winch to the rim that connects versatile pipe to the storage or pressure tank.
4. Winch the pump in order that there is a few feet of the versatile pipe outside the casing.
5. Put 2 items of two-by-six, with a chunk of cardboard sandwiched between, along side C-clamps.
6. Using bolts through the holes, tighten the clamp onto the versatile pipe simply higher than the casing pipe.
7. Unhook the winch cable from the pump rim.
8. Stuff one thing into the pipe to stop mud and contaminants from getting into your well and therefore the groundwater; you will see the recent (cleaned) blanket that was utilized in the exposure at prime.